Magnet Sorting And Dispensing Assembly Equipment

Assembly equipment, used for sorting and dispensing materials, assembly The dispensing and assembly machine is divided into the following parts: Clamping mechanism: Uses a side groove combined with a cylinder to lead into the groove, then the cylinder pushes down to achieve the unloading function. Fixture positioning mechanism: Achieves positioning of the fixture by using three cylinders to lift from below. Discharge push-out mechanism: Uses a cylinder to drive a push needle to push the product out of the fixture. Rodless cylinder misalignment receiving mechanism: Uses a rodless cylinder to drive two fixtures to achieve the function of exchanging material reception and unloading from both sides. Iron core assembly equipment motion process: Step 1: The fixture is moved into position by a conveyor belt, then lifted for positioning by a cylinder; Step 2: The manipulator clamping mechanism moves to the left side for receiving, the left discharge push-out mechanism operates to push the product from the fixture into the clamping mechanism; Step 3: The manipulator moves above the fixture, the cylinder pushes the magnet into the fixture; Step 4: The manipulator clamping mechanism moves to the right side for receiving, the right discharge push-out mechanism operates to push the product from the fixture into the clamping mechanism; Step 5: The push cylinder returns, the manipulator places the product on the fixture, the fixture positioning cylinder moves down and the fixture flows away; Step 6: The product fills the fixture, the manipulator withdraws, the cylinder moves the fixture to the other side, cycling in sequence;